Rainbow Electronics MG260 - Manual (Page 218)

FLYFOT-MG260-MODULE
Page: 218 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
The location feature has to be activated to get information.
if the feature is not activated,”ERROR” is sent.
If the data are not valid at the requested time, the network measurement,
BCCH list and Timing Advance cannot be displayed (“,,” is displayed instead).
Syntax :
Command syntax : AT+WLOC =< mode > [,< time period/dump >]
Command Possible responses
AT+WLOC=0 OK
Note : stops the display of local information
AT+WLOC=3,255 Note : set the wished information
to display (255 -> complete information) OK
Command Possible responses
AT+WLOC=1 +WLOC:
Note : displays once the local information 02f802,0006,7772,f13101b04cf5127 8
91138e95a846d160,8b49d08d0797c
419e272e10889a0000093021703990
20403c1020a03c5020a03,00,010121
111349ff
OK
AT+WLOC=2,6 +CME ERROR:3
Note : 6 is not a multiple of 5
AT+WLOC=2,10 OK
Note : displays OK then the current local
information immediately for the first time and then
every 10 seconds.
+WLOC: 02f802,0006,7772,ed3001af4cf492780
b040889c74acc23,8b49d08d0797c419e2
72e1
0889a000009302160399020503c1020a0
3c5020
a03,00,010121111354ff
+WLOC:
02f802,0006,7772,f02d01ae4cf41278
4b03c889c846dba5,8b49d08d0797c
419e272e10889a0000093021703990
20403c1020a03c5020903,00,010121
111404ff
…