Rainbow Electronics MG260 - Manual (Page 202)

FLYFOT-MG260-MODULE
Page: 202 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
Command Possible responses
AT+CPHS=2,5 +WNON: 0,”Orange F”
Note :Get the operator name OK
AT+CPHS=2,5,1 +WNON: 1,”Orange”
Note :Get the short format operator OK
name.
AT+CPHS=2,5,0 +CME ERROR: 3
Note :When CPHS Feature is not
allowed or format name no accessible
AT+CPHS=2,5,1 +CME ERROR: 3
Note :When NON Feature is not
allowed or format name no accessible
AT+CPHS=0,5 OK
Note :Deactivation of Network Operator Note :No effect.
Name feature.
Defined values
<type format>
0 : Long format operator name
1 : Short format operator name (default value)
<operator name>
The name of the operator, in long or short format
18.31 FLYFOT CPHS information: +WCPI
Description
This indication provide CPHS information; ie. which data field are present in the SIM. This command
is the response to the AT+CPHS 2,6[,<data field>] command.
Syntax
Command : AT+CPHS=2,6[,<data field >]
Response syntax : +WCPI: <data field>,<status>
Command Possible responses
AT+CPHS=2,6 +WCPI: 0,”0033000F”
Note :Get the current status for all OK
CPHS info field
AT+CPHS=2,6,13 +WCPI: 13,1
Note :Get the current status for Call OK