Rainbow Electronics MG260 - Manual (Page 96)

FLYFOT-MG260-MODULE
Page: 96 / 246
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without
prior written agreement.
result code
AT+CCWA =0
Note: disable the presentation of an unsolicited
result code OK
AT+CCWA =1,1,1
Note: Enable voice call waiting OK
AT+CCWA =1,0,1
Note: Disable voice call waiting OK
Defined values :
<n> : result code presentation status in the follows
0: Disable
1: Enable
<mode>
0: Disable
1: Enable
2: Query status
<class>
1: Voice
2: Data
3: Fax
7: All classes (voice, data and fax)
A combination of different classes is not supported. It will only result in the activation / deactivation /
status request for all classes.
<status>
0: not active
1: active
<alpha> : optional string type alphanumeric representation of <number> corresponding to the entry found
in the ADN or FDN phonebook.
10.5 Calling line identification restriction +CLIR
Description:
This command allows control of the calling line identification restriction supplementary
service.