MTS Series 793 - Manual (Page 105)

2. On the Encoder Resources list, select the encoder resource you want to use, and then click +.
3. In the Internal name box, select or type the desired name for the RSA control knob.
4. Optional—in the Display name box, type the desired name for the RSA control knob.
5. Optional—on the Enable Switch tab, select the Digital Switch Resource list to allocate a digital input for
an RSA control on/off switch. As required, in the Display name box, type the desired name for the RSA
switch.
Station Configuration Files
About Corrupted Station Configuration Files
Corrupted configuration files cannot be used in the Station Manager or Station Builder applications.
When a corrupt .cfg file is detected, the following dialog is displayed, and a warning message is logged.
How to proceed
Click Yes to attempt to recover the corrupted file. A utility will scan the file and fix or recover whatever it can.
• A .txt file will open and display details about what was recovered.
• A new, usable .cfg file is created and opened. This file has the same filename as the orignal corrupted
file.
• The corrupted file is renamed with a tag “corrupt.” You may delete this file.
If you do not want to attempt to fix the file, click No. You can try to open a different file, or create a new one.
If a backup file exists, you can replace the corrupted file with the backup version.
How to Print a Station Configuration File
Click the Print icon on the Station Builder Print Preview window toolbar or click the Print icon on the Station
Builder toolbar, to print the current station configuration.
Click Print to File on the Station Builder File menu to save the current station configuration as a separate text
file.
MTS Series 793 Control Software 105
Station Builder