MTS Series 793 - Manual (Page 280)

•
The Off button turns red when that output is off.
4. You can also use the Station Manager Digital I/Os control panel to turn digital outputs on and off: Station
Controls panel toolbar > > DI/Os window > Outputs tab
How to Assign a Digital Output to Run/Stop Controls
1. Ensure that digital outputs have been added using the Station Builder application.
2. In the Station Manager window, click Display > Station Setup.
3. In the Station Setup navigation pane, click Digital Inputs/Outputs > Outputs.
4. In the Digital Outputs window, set the Assignment for the digital output to Run/Stop.
5. Select the required polarity (Invert or Normal) in the Polarity drowdown menu.
Limit and Error Detectors
How to Access Detector Settings
The Station Manager application provides multiple locations where you can monitor and define detector limits
and actions.
Station setup access
The Station Setup window includes Limit Detectors and Error Detectors panels with tabs where you can define
detector limits and actions.
Each channel input includes a Limits tab where you can define detector limits and actions.
280 MTS Series 793 Control Software
Station Setup