MTS Series 793 - Manual (Page 401)

Description Item
Sensitivity—Pressing Rescale will calculate optimal sensitivity values
but will not change offset values.
Engineering Units or Volts. Display Mode
Note:
Volts apply only to time and X/Y plot modes.
The X-Y value method allows you to mark individual data points on the
trace by clicking points of interest. Point Picking
The Y values at X method allows you to see the Y coordinate value of
two traces simultaneously at the point they intersect a vertical reference
line. You can drag the vertical reference line across the X axis.
Specifies the color of the grid lines. Grid Color
Specifies the grid’s background color. Background Color
Select to display grid lines. The grid lines are shown at Units/Division
increments. Show Grid
For Time Plots:
• The Y-Axis has eight divisions
• the X-Axis (time for time plots) has ten divisions
For X/Y Plots:
• The X and Y Axes have eight divisions each
For Frequency Plots:
• The Log Y-Axis has a grid line at each decade
• Linear Y-Axis has eight divisions
• The Linear X-Axis has eight divisions
When enabled, various scope window elements other than the plot (for
example, Pan-Zoom control, axis titles, and axis value labels) will be
shown or hidden as the window is sized horizontally and/or vertically. Auto-Sizing
This happens automatically as you size the scope window. In contrast,
window elements will be shown or hidden without sizing the scope
when you press the Change View icon (upper right hand of the scope
window).
Trace Tab
This tab defines the display of grid Trace and Limit Lines.
MTS Series 793 Control Software 401
Scopes and Meters