MTS Series 793 - Manual (Page 337)

Warning:
Changes in Set Point and Span values made with hydraulic pressure on can result in unexpected
actuator movement.
A moving actuator can injure anyone in its path.
Always clear the actuator area before changing values.
1.
In the Station Manager window Station Controls panel toolbar, click .
2. In the Setpoint and Span window:
a) If the Channel button is available, click it to choose an individual channel or a Master Command Group.
b) Set the Setpoint.
c) Set the Span.
If necessary, click the Setpoint or Span text to display a window where you can change the slider-bar
range. These settings can be saved in a parameter set.
Message Logs
About Message Logs
Logged events
Message Logs record station and test events as they occur, including:
• File events
• Resource mismatches
• Hydraulic and station state changes
• Detector activity
• Over-temperature conditions
• Full-scale changes
MTS Series 793 Control Software 337
Using Station Manager to Run Tests