MTS Series 793 - Manual (Page 399)

Pan-Zoom Control Mouse Operations for Scopes
Y axes Pan-Zoom controls are disabled when logarithmic scaling is selected for frequency plots.
Pan-Zoom Control on Time Axis (Also Applies to Vertical Axis)
Pan-Zoom Control Mouse Operations
Effect Mouse Operation Description
Callout
A single click pans one-tenth of the range. For example, if
the trace time equals 2 seconds, a single click pans the
range 0.2 seconds Arrow Region 1
Clicking on either side of the Thumb within a Pan-Zoom
control pans (shifts) the trace image horizontally on X axis,
and scrolls the image vertically on the Y axes. Single-click left
mouse button in
the Page Region
to pan the trace. Page Region 2
The size of the Pan-Thumb within the Pan-Zoom control
defines the visible portion of the axis’ range. Single-click left
mouse button on Min/Max Zoom 3,5
the Min or Max
Increasing the size of the Pan-Thumb increases the visible
portion of the range, or “zooms out.” Decreasing the size
Zoom-Thumb,
hold and drag.
the of the Pan-Thumb decreases the visible portion of the
range, or “zooms in.”
The position of Pan-Thumb within the Pan-Zoom control
defines the visible portion of the range of the axis. Single-click left
mouse button on Pan-Thumb 4
the Pan-Thumb,
hold and drag.
Shifting the position of the Pan-Thumb within the Pan-Zoom
control changes the visible portion of the axis’ range.
Displays the axis’ Range Select window. This window allows
you to enter specific values to define the visible portion of
the range of the axis. Double-click left
mouse button in
the Pan-Thumb. 4
Increasing the size of the range increases the visible portion
of the range, or “zooms out.” Decreasing the size the of the
range decreases the visible portion of the range, or “zooms
in.”
The values you enter in this window define the size of the
Pan-Thumb.
MTS Series 793 Control Software 399
Scopes and Meters