MTS Series 793 - Manual (Page 136)

Description Item
Set speed with slider bar, from 0-100. Thumbwheel Speed
Select from the following options: Thumbwheel Direction
Normal
Invert
This checkbox is only accessible at the Configuration access level. This
will allow all users to use a handset for tuning and calibration. Allow exclusive control at any
access level
Once checked, this box can be unchecked (or disabled) from any access
level.
If this box is not checked, and you set Exclusive control from the handset,
the access level changes to Operator.
These options are only accessible at the Configuration access level: System Controls (All Stations)
Do not allow manual command with Force or Torque
feedbacks-disables Force and Torque control modes for manual
command from the handset.
Do not allow manual command at high power-check this box to enable
manual command from the handset/uncheck to disable manual
command.
For Acumen systems, this box is unchecked by default.
About Exclusive Control and the Handset
The Model 494.05 Handset is a portable device that provides station control. It is typically used to facilitate
specimen installation, and because it is mobile, it is more convenient to use in close proximity to the specimen
than the PC interface.
Note:
When you open a station that includes a handset, neither the handset nor the Station Manager
application has exclusive control.
Using exclusive control at the Operator access level
Your access to Station Manager application controls is determined by your access level, which is password
protected. Access levels include Operator, Tuning, Calibration, and Configuration.
By default, you can assign exclusive control to the handset only when the access level is set to Operator.
This prevents anyone from making tuning or calibration adjustments while the handset has exclusive control
because those adjustments require Tuning and Calibration access levels.
136 MTS Series 793 Control Software
Station Manager Application