MTS Series 793 - Manual (Page 435)

Basic TestWare Toolbar
Clicking the Basic Testware toolbar buttons display the Basic TestWare windows and tabs described in the
following pages.
Test Setup Window
Access
Basic TestWare toolbar >
Use the Test Setup window’s tabs to define Basic TestWare tests.
Command tab
Use the Command tab to define the program attributes for your test command. The controls in this window
change depending on whether you select a cyclic or monotonic command.
Command Tab
Description Item
Specifies the command type (Monotonic or Cyclic). Type
Allows you to select a control channel for the test command from a list of all
station channels. Channel
Specifies the control mode for the selected control channel. Control Mode
Cyclic commands only—Sets the target mean level. Target Setpoint
Cyclic commands only—Sets the command amplitude. Amplitude
MTS Series 793 Control Software 435
Basic TestWare Application