MTS Series 793 - Manual (Page 121)

Note:
“Simulation” appears in the window status bars when in the demonstration mode.
How to Start the Demonstration Mode
1. Start the Demo System Loader utility:
Start > MTS 793 Software > Tools > Demo System Loader
2. Start the Station Manager application:
Start > MTS 793 Software > Station Manager
When the Station Manager application starts, the Select Project window appears automatically.
Note:
If you set a default project, the Select Project window does not appear, but the Open Station window
appears.
About Station Views
To avoid reopening windows, displays, and scope/meter windows each time you reopen a station configuration,
you can save the desktop layout as a station view.
Restore saved view
When you restore a saved station view, the windows reposition automatically.
Default views
Each time you close the Station Manager application, it saves the current station view as the default view.
When you reopen the station, it appears with the windows repositioned as they were when the station was
last closed. This allows a user to always revert to the last saved station.
Restore default view
You can also restore a default view by selecting Restore Default View, as described below. This function
repositions the station windows to where they were the last time the station was closed.
How to Manage Station Views
How to save a view
On the Station Manager application File menu, click Save View.
How to restore a saved view
On the Station Manager application File menu, click Restore Saved View.
How to restore a default view
On the Station Manager application File menu, click Restore Default View.
MTS Series 793 Control Software 121
Station Manager Application