MTS Series 793 - Manual (Page 119)

a) Select a configuration (.cfg) file.
b) In Parameter Sets, select a parameter set if available.
Only parameter sets that were created with the selected configuration file are listed.
Note:
The Station Manager application saves the last parameter set to the station configuration file,
and will attempt to restore it if currently available.
c) Select the station Interlock Chain.
Note:
The Station Manager application saves the last used interlock chain to the station configuration
file, and will attempt to restore it if currently available.
d) Optional—Click Enable Remote Station Control (RSC) on the selected interlock chain.
For FlexTest IIm systems with multiple RSCs, the selected Interlock Chain determines which RSC will
be enabled.
RSC is not available in the Demonstration mode.
e) Click Open to open the configuration file.
About Access Level Settings
The Access Level control limits user access to change tuning, calibration, and configuration settings. Access
to Tuning, Calibration, and Configuration levels requires passwords that were created during software
installation.
MTS Series 793 Control Software 119
Station Manager Application