MTS Series 793 - Manual (Page 77)

Description Callout
Controller 1
Command 2
External Controller 3
Error 4
Feedback 5
About Calculated Inputs and Outputs
Calculated inputs
In addition to the regular input resources installed in your controller, you can also assign a calculated input
for control feedback or data acquisition. Calculated input values are determined by applying a user-defined
mathematical equation to the specified signal values.
Calculated outputs
In addition to the regular output resources installed in your controller, you can also use a calculated output
to drive a valve or other output resource. Calculated output values are determined by evaluating a user-defined
mathematical expression that uses the values of other signals.
License requirements
Calculated inputs and calculated outputs are optional features which require separate licenses. For example,
you may have a calculated inputs license and not have a calculated outputs license.
About Power Control
FlexTest IIm/CTC controllers
On FlexTest IIm/CTC controllers, up to four hydraulic service manifolds can be connected to J28A–J28D on
the rear panel of the Model 497.05 Hydraulic Control Panel.
If desired, you can allocate the same HSM resource to multiple FlexTest IIm channels.
MTS Series 793 Control Software 77
Station Builder