MTS Series 793 - Manual (Page 151)

Description Item
Deletes the selected signal page. Delete
Select to not display controlling application names on the signal page. Hide Application
Select to not display channel information on the signal page. Hide Channel Information
Specifies the signal list displayed on the selected signal page. Current Signal List
Applies the changes to the RSC immediately. The setting is saved with the current
view set. Apply
Rig Commands Tab
About Rig Commands (Park/Ride)
User-defined rig commands are used to move actuators to predetermined command levels for specimen
installation/removal or to preload a specimen.
Note:
To use Rig Commands, you must turn on the Rig Commands option in the Project Manager application’s
System Settings window.
Rig Command Settings
Each of the four available rig commands are configured in the Channel Options window. Configuration includes
selecting the control mode and command level for each channel used in the rig command. Other settings
allow you to set the ramp time for each command and assign digital-output actions for different command
levels. Use the Name text box to change the wording that appears in each rig command button.
Note:Rig command settings are saved in parameter sets.
MTS Series 793 Control Software 151
Station Manager Application