MTS Series 793 - Manual (Page 147)

Item Callout
Command Amplitude 1
Zero Setpoint 2
Stop/Hold Ramp Time 3
Waveform ramping from target setpoint to zero Setpoint. 4
Target Setpoint 5
Begin/End Time Settings
Sets starting and ending times for tapered wave shapes.These values also apply to the beginning and ending
times of external command signals applied to controllers with a soft start/stop feature.
Access
Tools menu > Channel Options > Channel Options window > Command Options tab
Tapered Waveform —The waveform tapers up to the full command amplitude and down to the Target Setpoint
MTS Series 793 Control Software 147
Station Manager Application