About the demonstration mode – MTS Series 793 User Manual

Page 120

Advertising
background image

Note:

When you change access levels, the change is entered into the station log.

Description

Access Level

The default access level. This level does not need a password
and has the fewest privileges.

Operator

Enter this level to make tuning adjustments.

Tuning

Enter this level to edit all Station Manager application windows
except the Event-Action Editor window, the Calculation Editor
window, and reconfigurable signals.

Calibration

Note:

Calibration is the only access level that allows you to
modify calibration parameters for signals.

Enter this level to edit all Station Manager application windows
except Calibration.

Configuration

Station Manager settings that require a Configuration access
level include:

Using the Event-Action Editor and Calculation Editor
windows.

Changing the name, dimension, or calibration parameters
for reconfigurable signals (if enabled in the Station Builder
application).

Note:

Some Series 793 applications may have to be closed
to enter this level.

About the Demonstration Mode

The demonstration mode simulates a connection with your hardware components, allowing you to run the
system software without using actual hardware.

Use the Demo System Loader utility to start the demonstration mode if you want to test a new station
configuration or learn to use the system software controls.

120 MTS Series 793 Control Software

Station Manager Application

Advertising