MTS Series 793 - Manual (Page 409)

Note:
If the scope is running you must press and hold the left mouse button to cause crosshairs to appear
on the plot.
Data Point Crosshairs/Display Box
When you stop the scope to review stored scope data, marker crosshairs (with a data point display box that
contains corresponding coordinate and instantaneous slope values) will appear whenever you place the
cursor over the plot.
Description Callout
Marker Pair Left/Right Delta 1
Marker Coordinate/Slope: [Left: x,y,slope] [Right: x,y,slope] 2
Data Point Display box [x,y,slope,dx,dy] 3
Marker crosshairs 4
Marker Coordinate/Slope display
Click the crosshairs to create a data point marker on the scope trace. The marker’s coordinate and
instantaneous slope values are displayed in the upper left-hand portion of the plot.
MTS Series 793 Control Software 409
Scopes and Meters