MTS Series 793 - Manual (Page 130)

Description Item
Displays the Print Parameters to File window. Print to File
Quits the Station Manager application. Exit
Note:
Before exiting Station Manager, station power must be off and
any ongoing test must be stopped. You may also need to shut
down some applications connected to the station before you can
shut down the station.
Note:
All 793.00 software applications connected to the station will
shut down upon exiting Station Manager.
Print Preview Window
Access
File menu > Print Preview or Station Manager window toolbar
This window displays a print preview of the parameter set. A toolbar facilitates access and display of parameter
set changes.
Asterisks (*) identify items that have been changed since the file was opened. In addition, you can highlight
these changes by selecting the Enable Change Highlighting button on the Print Preview toolbar.
Display Menu
This menu’s commands display station setup and monitoring windows.
Description Item
Displays the Station Setup window. Station Setup
Displays the Meters windows. Meters
Displays the Scope windows. Scope
Displays the Message Logs window. Message Logs
Minimizes, with the exception of the Station Manager window, all open Station
Manager application windows. Minimize All
Restores all minimized Station Manager application windows. Show All
Applications Menu
This menu’s commands open applications that are used with the Station Manager application.
130 MTS Series 793 Control Software
Station Manager Application