MTS Series 793 - Manual (Page 149)

Description Item
Sets the ramp time for commands applied with the Setpoint (Setpoint
and Span window), Target Setpoint (Function Generator or BTW), or
Manual Command (Manual Command window) controls. Setpoint
The Setpoint time specifies how long it takes to change the Setpoint
from zero to full scale.
Sets the taper time for changes applied with the Span (Setpoint and
Span window) or Master Span (Station Controls panel) controls. Span
The Span time specifies how long it takes to change the Span from 0
to 100%.
Description Callout
Initial Command Amplitude 1
Initial Target Setpoint 2
Specified Begin Time 3
Specified Span Time 4
Specified Setpoint Time 5
New Command Amplitude 6
The Station Manager Channel Span or Master Span control reduces the
waveform span. 7
The Station Manager Setpoint control changes the waveform setpoint. 9
MTS Series 793 Control Software 149
Station Manager Application