MTS Series 793 - Manual (Page 169)

Access
Station Manager > Display menu > Station Setup > CAN Bus Editor
Note:
The CAN Bus Editor requires a Station Manager access level of Configuration.
CAN Bus Control Panel
All CAN Bus controls are accessible from a single control panel. The CAN Bus Editor is found in the Station
Setup window.
Access
Display menu > Station Setup > CAN Bus Editor
Description Item
Indicates the current status of the port. Open/Close
Enables reading of the selected port. If disabled, the port cannot process incoming messages. Read
Enable
Enables writing to the selected port. If disabled, the port cannot send or write messages to the
bus. Write
Enable
The default behavior is for a port to automatically open when the Reset button on the Station
Controls panel is clicked. This toggle allows you to disable the feature and deactivate the
button for a given port. Open with
System
Reset
MTS Series 793 Control Software 169
Station Manager Application