MTS Series 793 - Manual (Page 367)

Item Callout
Left Stroke 1
Right Stroke 2
Translation Displacement 3
“Left Stroke” - “Right Stroke” / 2.0 4
Compression Displacement 5
“Left Stroke” - “Right Stroke” / 2.0 6
Compression Load 7
“Left Load” + “Right Load” / 2.0 8
Compression Displacement 9
How to Set Up Calculations for Two Matrixed Channels
To set up these two matrixed channels, use the following procedure:
1. Use Station Builder to create a translation channel.
a) Select Channels on the Station Builder navigation pane.
b) Select <<Virtual Output>> for your calculated channel’s output hardware resource.
c) Enter a desired channel name (for example, Translation)
MTS Series 793 Control Software 367
Calculated Signals