MTS Series 793 - Manual (Page 432)

a) Select a Message Severity level.
b) Select a Message Log source to specify an existing log file.
c) Enter the required message in Message Text.
d) Click Add to enter the message.
How to Delete a User Entry from the Message Log
Only user entries can be deleted.
1.
In the Basic TestWare Toolbar, click .
2. In the Message Logs window, highlight the user entry to be deleted.
3.
In the Message Logs Toolbar, click .
4. In the Delete Confirmation window, click OK to delete the selected entry.
How to Define What Messages Are Logged
Use the following procedure to specify the types of messages that are logged into the Basic TestWare test
log:
1. On the Basic TestWare toolbar, click Test Setup.
2. Click the Test Log tab on the Test Setup window.
3. Under Minimum Severity, select the least severe level of messages logged.
4. Under Source:
• Select This Application Only to log only Basic TestWare messages.
• Select All Applications to log both Basic TestWare and Station Manager messages.
5. If needed, under Archive Auto Deletion, click Delete Older Than to enable automatic deletion and then
enter the number of days.
How to Manually Archive All of the Messages in the Message Log
1.
In the Basic TestWare Toolbar, click .
2.
In the Message Logs Toolbar, click to archive the file.
3. In the Archive Confirmation window, click Yes.
The Message Logs window displays a message showing when the file was archived and its name and
location.
432 MTS Series 793 Control Software
Basic TestWare Application