Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 175)

Communicating with Devices on a DeviceNet Link 8-9
Creating a Project for the DriveLogix5730 Controller
a
hw0939.tif
ahw0940
.tif
1. In the Controller Organizer, select the I/O Configuration folder. Right-click the selected folder and select New Module.
2. Select the 1788-DNBO DeviceNet
Scanner from the list of possible
communication devices.
Click OK.
ahw094
1.tif
3. Enter a Name for the port and make sure it is assigned to
slot 4.
Click Finish.