Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control User Manual
Page 44
Advertising
2-20
Placing and Configuring the Drive
4.
In RSLogix 5000, go to the Setup tab of the Properties window. Click the Browse button. Select the
existing DriveExecutive file (Existing Drive.dno in this example). Click the open button.
ahw078
5.tif
ah
w0795.tif
5.
Click the Apply button
and then launch DriveExecutive.
ahw0796.ti
f
ahw0797.ti
f
Advertising
This manual is related to the following products: