Programming the controller, Programming the controller -2 – Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control User Manual
Page 72
Advertising
4-2
Configuring DriveLogix Motion
Programming the Controller
In RSLogix 5000, create a new project.
1. From the File menu, select New.
2. In the New Controller dialog define the project:
a. Use Revision 15 or higher.
b. Enter a Name for the project (e.g., Motion_Drive).
c.
Click the OK button.
Advertising
This manual is related to the following products: