Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 205)

Access Procedures B-9
Installing the
Communications
Daughtercard
A
B
C
A
C
=
Task Description
Align circuit board in Communications
Daughtercard with rail on Daughtercard slot
Insert the Communications Daughtercard
Tighten screws (7-10 lb.-in.)
A
B
C C
ahw0867.eps
esd.ep
s
Important: This procedure can be performed without
removing the cassette, if the Logix
Expansion Board is already installed.