Configuring the compactbus, Configuring the compactbus -5 – Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control User Manual
Page 55
Advertising
Placing and Configuring Local I/O
3-5
Configuring the
CompactBus
When you create a DriveLogix5730 project, the programming software
automatically creates the local CompactBus. You must configure the
CompactBus.
1.
In the Controller Organizer, select CompactBus Local icon. Right click and
select Properties.
ahw081
0.tif
ahw0811.ti
f
Advertising
This manual is related to the following products: