Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 63)

Placing and Configuring Local I/O 3-13
The following examples show addresses for data in a DriveLogix5730
system.
MemberName Specific data from the I/O module; depends on the type of data the
module can store
For example, Data and Fault are possible fields of data for an I/O
module. Data is the common name for values that are sent to or
received from I/O points.
SubMemberName Specific data related to a MemberName.
Bit (optional) Specific point on the I/O module; depends on the size of the I/O
module (0-31 for a 32-point module)
Example:
I/O module on the local CompactBus utilizing two banks
This address variable: Is:
1 2 3 4 5
ahw0818
.eps
Bank 1 Bank 2