Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 43)

Placing and Configuring the Drive 2-19
Using Existing DriveExecutive Lite Files
Before using an existing DriveExecutive Lite file, verify the firmware
revision, communication format, and power rating in the drive file match the
data entered in drive module properties in your DriveLogix application.
ahw0
793.tif
1. Select Properties from the Drive menu.
2. View the revision and ratings on the General tab of the Properties window.
3. Refer to Viewing the Communication Interface to the Controller on page 2-16 , to view
the communication format.
ahw079
4.tif