Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 37)

Placing and Configuring the Drive 2-13
2. In the Controller Organizer, select the PowerFlex 700S drive. Right-click the drive module and select Properties.
3. Select the Power tab.
4. Select the correct Drive Rating. This data can be found on the PowerFlex 700S data nameplate.
ahw0780
.tif
ahw078
1.tif
TIP: If your drive’s power rating does not appear as a selection, you do not
have the DriveExecutive Lite database file for your drive. To create a
database file, connect to the drive with DriveExecutive Lite. This will
automatically create the database. You can also download the database file
from http://www.ab.com/drives/data.html