Connecting the battery – Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control User Manual

Page 200

Advertising
background image

B-4

Access Procedures

Connecting the Battery

Allen-Bradley ships the DriveLogix controller with the battery installed, but
disconnected. You must connect the battery while installing the drive.

Storing the Battery

ahw0865.eps

Battery

Plug and socket

Battery clip

!

ATTENTION: Store batteries in a cool, dry environment.
We recommend 25° C with 40% to 60% relative humidity.
You may store batteries for up to 30 days between -45° to 85°
C, such as during transportation. To avoid possible leakage,
do not store batteries above 60° C for more than 30 days.

Advertising
This manual is related to the following products: