Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 74)

4-4 Configuring DriveLogix Motion
5. Select the desired drive (PowerFlex 700S 2-400V in this example) and
click the OK button.
6. In the Major Revision dialog:
a. Select the Major Revision number and click the OK button.
7. Configure the Drive by specifying the characteristics of the module
using the New Module dialog:
a. Enter a name for the drive in the Name field (Drive_Axis in this
example).
a. Select Motion Control in the Comm Format box.
b. Verify that the Open Module Properties box is checked.
c. Click the OK button.