Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 191)

DriveLogix5730 Controller Specifications A-3
Controller LEDs
!
ATTENTION: The controller LEDs are only operational when
the drive is energized, and only visible with the drive door open.
Servicing energized equipment can be hazardous. Severe injury
or death can result from electrical shock, burn or unintended
actuation of controlled equipment. Follow Safety related
practices of NFPA 70E, ELECTRICAL SAFETY FOR
EMPLOYEE WORKPLACES. DO NOT work alone on energized
equipment!
le
d_dr
iv
elogix.eps
RUN (Drive)
(1)
RUN (DriveLogix)
I/O
COM
FORCE
BAT
OK
(1) Do not confuse the Drive Run LED with the DriveLogix Run LED. The Drive
Run LED indicates a drive function NOT a DriveLogix function.