Rockwell Automation 5730 DriveLogix5730 Controller for PowerFlex 700S Drives with Phase II Control - Manual (Page 3)

Summary of Changes
Manual Updates This information summarizes the changes to the DriveLogix5730 Controller
for PowerFlex 700S Drives with Phase II Control, publication 20D-UM003,
since the July 2004 release.
Change See Page...
Added information for contacting Technical Support and updated Controller Firmware
Revision information Preface-2
Updated information and example for specifying task priorities 1-7
Updated information on controller fault response settings 3-2 , 3-6 , 3-8 ,
and 3-12
Updated the System Requirements for configuring DriveLogix Motion 4-1
Updated the Coarse Update Period setting from 4ms to 2ms 4-9
Updated the tables for parameter links and parameter settings for configuring
DriveLogix Motion 4-18 and
4-19
Updated the Communicating with Devices on an EtherNet/IP Link procedures to reflect
the support of duplicate IP address detection. 6-4
Added information regarding updated MSG packet size. 6-19
Added information regarding updated MSG packet size. 7-9
Added a new Appendix for application restrictions C-1