Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 105)

3-26 Operator Interface
7000-UM150I-EN-P – June 2013 7000 “B” Frame
When the [enter] key is pressed for a valid tag code (i.e. Figure 3.28)
the selected tag will be used to continue the operation for which the
selection process was being used if that tag is appropriate for the
operation. For example: if you are performing a parameter
modification operation, but have selected a read-only parameter tag
code, you will be unable to exit the screen with this read-only
parameter. The screen will display this information, along with the
tag's current value, such as shown in Figure 3.30. Re-enter a tag
code for a parameter or press [F10] to return to the previous screen
without making a selection.
Figure 3.30 – Selected Tag Inappropriate
Edit Text
Various operations require a text string to be entered. Operations
requiring this are:
- setting external faults
- adding text to selected Top Level Menu meters
- identifying the drive with a text string
- entering a filename
The operator interface's keypad does not contain any alpha keys to
allow direct input of the characters. This section will describe the
operation for which characters may be entered.
Figure 3.31 – Typical Text Edit Screen