Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 387)

Component Definition and Maintenance 6-97
7000 “B” Frame 7000-UM150I-EN-P – June 2013
Preparation for Required
Downloading Firmware

Laptop loaded with Windows HyperTerminal program

A null-modem cable with a 9-pin female connector for the
laptop serial port, and a 9- pin male connector for the CIB
Communication Port (J8). (A serial cable with pins 2-3
swapped at one end will also work)

Latest copy of the drive firmware file (filename.XFW)
 Drive Access level must be at least „Advanced‟ or higher
(Service or Rockwell).
Here is a typical pin out of a complete null-modem cable.
Saving Original Settings
Ensure the parameters are saved to NVRAM, and saved to the
Operator Interface Terminal, and saved to any other external source
such as the Flash Card, DriveTools, or printed to a hardcopy.
Hit F10 (Access), and highlight Advanced. Press Enter and you
should have Advanced level access.