Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 132)

Operator Interface 3-53
7000 “B” Frame 7000-UM150I-EN-P – June 2013
Figure 3.77 – No Alarm Help
Request Printouts
When the drive contains the optional printer, you can obtain hard
copies of the data that you are able to view on the terminal. The
printouts are requested from the PRINTER screen. Press [F3] while
displaying the Top Level Menu.
The screen typical of Figure 3.78 is displayed. It shows the current
status of the printer (A-B part #80025-290-01) and the type of
reports that are available. (Refer to the “Syntest SP401 Thermal
Printer User Manual” for information regarding the use of the printer
hardware and a description of the various reports available.) Using
the [cursor up] and [cursor down] keys, select the desired report and
press the [enter] key. The report will be sent to the printer.
The printer can automatically print out the alarms as they occur.
This feature is selected as one of the report formats. In the Figure
3.78, the "AUTO - ON" indicates that this feature is currently
enabled. To disable the feature, use the [cursor down] key to select
the text and press the [enter] key. The text will change to "AUTO -
OFF" (if a printer is attached). The automatic alarm printout feature
is now disabled. Pressing the [enter] key again while selected will
enable the feature.
Figure 3.78 – Typical Printer Screen