Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 15)

P-2 Preface
7000-UM150I-EN-P – June 2013 7000 “B” Frame
Both of the above could indicate:
• A possible trouble spot
• Tell what causes the trouble spot
• Give the result of an improper action
• Tell the reader how to avoid trouble
S H O C K H A Z A R D S H O C K H A Z A R D This symbol alerts the user to a potential electrical
shock hazard that exists on a component or
printed circuit board.
General Precautions
A T T E N T I O N A T T E N T I O N This drive contains ESD (Electrostatic
Discharge) sensitive parts and assemblies. Static
control precautions are required when installing,
testing, servicing or repairing this assembly.
Component damage may result if ESD control
procedures are not followed. If you are not
familiar with static control procedures, reference
Allen-Bradley publication 8000-4.5.2,
“Guarding Against Electrostatic Damage” or any
other applicable ESD protection handbook.
A T T E N T I O N A T T E N T I O N An incorrectly applied or installed drive can
result in component damage or a reduction in
product life. Wiring or application errors, such
as, undersizing the motor, incorrect or
inadequate AC supply, or excessive ambient
temperatures may result in malfunction of the
system.
A T T E N T I O N A T T E N T I O N Only personnel familiar with the PowerFlex 7000
Adjustable Speed Drive (ASD) and associated
machinery should plan or implement the
installation, start-up and subsequent maintenance
of the system. Failure to comply may result in
personal injury and/or equipment damage.