Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 44)

Drive Installation 2-9
7000 “B” Frame 7000-UM150I-EN-P – June 2013
Exhaust hood panels
(Quantity = 2)
Flat plate
(Quantity = 1)
M6 thread forming screws
(Quantity = 20)
Figure 2.4 – Fan Hood Assembly
Locate the exhaust hood on top of the cabinet per Figure 2.5 and re-
install the original cover plate previously set aside. (Care must be
taken that the notches on the bottom flange are oriented toward the
sides of the drive). Affix assembly to the drive top plate. Tighten all
hardware.
A T T E N T I O N A T T E N T I O N Any screws that are accidentally dropped in
the equipment must be retrieved as damage
or injury may occur.