Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 404)

6-114 Component Definition and Maintenance
7000-UM150I-EN-P – June 2013 7000 “B” Frame
14. Press F5 [POST] key and enter 10 (this is the percentage of
post-trigger samples) and then press the Enter key.
15. Now, press F10 [EXIT] key to exit to „Diagnostic‟ screen. On
the „Diagnostics‟ screen, verify that the Status is „Running”,
which means the Diagnostic Trend is ready and will capture the
data whenever the trigger condition is satisfied. If the Status
shows „Stopped‟ then press F7 [Re-Arm] key. This will change
the Status to Running.
16. Now press F10 [EXIT] to exit to the main screen.