Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual - Manual (Page 135)

Programming Reference 4-49
For AutoMax applications, refer to the AutoMax Network Communication Option Board
manual (D2-3308).
For DeviceNet applications, refer to the DeviceNet Network Communication Option
Board manual (MAN0096-03).
For ControlNet applications, refer to the ControlNet Network Communication Option
Board manual (D2-3390).
For PROFIBUS applications, refer to the PROFIBUS Interface Board manual (49’1355).
For AutoMax applications, refer to the AutoMax Network Communication Option Board
manual (D2-3308).
For DeviceNet network applications, refer to the DeviceNet Network Communication
Option Board manual (MAN0096-03).
For ControlNet network applications, refer to the ControlNet Network Communication
Option Board manual (D2-3390).
For PROFIBUS applications, refer to the PROFIBUS Interface Board manual (49’1355).
P.062 Option Port: Communication Loss Response
This parameter
specifies how the
drive will respond to a
network
communication
failure if the option
port has been
selected as the drive
control source
(P.000 = OP).
Parameter Range: Network-dependent
Default Setting: 0
Parameter Type: Tunable
Refer also to parameters: P.000 Control Source
P.063 Option Port: Network Reference Source
This parameter
specifies where the
drive will get its
speed or torque
reference when the
option port is
selected as the
control source
(P.000 = OP).
Parameter Range: Network-dependent
Default Setting: 0
Parameter Type: Configurable
Refer also to parameters: U.000 Torque Reference Source