Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual - Manual (Page 20)

1-6 GV3000/SE AC Drive Software Reference, Version 6.06
Step 3.7 Press the ENTER key to display the default setting of P.002.
This displays the default setting for
deceleration time (20.0 seconds).
Step 3.8 Press the ▲ key to increase deceleration time, or the ▼ key to decrease
deceleration time.
The adjustment range is:
1.0 to 999.9 seconds.
VALUE ENTERED:
Step 3.9 Press the ENTER key to save the changed value.
After pressing ENTER, the same
parameter number is displayed. You can
now go to the next parameter.
Step 3.10 Press the ▲ key to display P.003, Minimum Speed.
This parameter sets the minimum speed
in Hz.

)RUZDUG
5HYHUVH
$872
0$1
(17(5
581
-2*
PROGRAM
67$57
6723
5(6(7
63(('
92/76
$036
+]
.Z
72548(
3DVVZRUG
5811,1*
5(027(
-2*
$872
)25:$5'
5(9(56(
352*5$0
5(/,$1&(
(/(&75,&
S
)RUZDUG
5HYHUVH
$872
0$1
(17(5
581
-2*
PROGRAM
67$57
6723
5(6(7
63(('
92/76
$036
+]
.Z
72548(
3DVVZRUG
5811,1*
5(027(
-2*
$872
)25:$5'
5(9(56(
352*5$0
5(/,$1&(
(/(&75,&
S
)RUZDUG
5HYHUVH
$872
0$1
(17(5
581
-2*
PROGRAM
67$57
6723
5(6(7
63(('
92/76
$036
+]
.Z
72548(
3DVVZRUG
5811,1*
5(027(
-2*
$872
)25:$5'
5(9(56(
352*5$0
5(/,$1&(
(/(&75,&
!
ATTENTION: The drive can operate near zero speed. The user is
responsible for ensuring safe conditions for operating personnel by
providing suitable guards, audible or visual alarms, or other devices to
indicate that the drive is operating near zero speed. Failure to observe
this precaution could result in severe bodily injury or loss of life.