Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual - Manual (Page 192)

B-2 GV3000/SE AC Drive Software Reference, Version 6.06
Parameter No. Parameter Name Setting Date
Second
Menu
General
(cont’d)
P.040 Motor Overload Enable
P.041 Motor Overload Type
P.042 Line Dip Ride-Through Time
P.043 Fault Auto Reset Attempts
P.044 Fault Auto Reset Time
P.045 Output Phase Loss Enable
P.047 Carrier Frequency (kHz)
P.048 Volts/Hertz or Vector Regulation
P.049 Country Defaults
P.050 Restore Defaults
P.051 Programming Disable
P.052 AUTO/MAN Key Disable
P.053 Manual Reference Preset Enable
P.054 Level Sense Start Enable
P.055 STOP/RESET Key Disable
P.060 Network Drop Number
P.061 Network Connection Type
P.062 Option Port: Communication Loss Response
P.063 Option Port: Network Reference Source
P.064 Option Port: Network Trim Reference Source
P.065 Option Port: Type and Version
P.066 Network Output Register 1 Source
P.067 Network Output Register 2 Source
P.068 Network Output Register 3 Source
P.069 Network Output Register 4 Source
P.090 Diagnostics Source
P.091 Diagnostics Display
P.095 Power Module Output Amps
P.098 Software Version Number
P.099 Power Module Type