Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual - Manual (Page 191)

Record of User Parameter Settings B-1
A
PPENDIX
B
Record of User Parameter Settings
Parameter No. Parameter Name Setting Date
First
Menu
General
P.000 Control Source
P.001 Accel Time 1 (RAMP 1)
P.002 Decel Time 1 (RAMP 1)
P.003 Minimum Speed
P.004 Maximum Speed
P.005 Current Limit
P.006 Second Menu Password
Second
Menu
General
P.007 Terminal Strip Digital Inputs Configure
P.008 Terminal Strip Speed Reference Source
P.009 Terminal Strip Analog Input Offset
P.010 Terminal Strip Analog Input Gain
P.011 Terminal Strip Analog Input Configure
P.012 Terminal Strip Analog Output Source
P.013 Output Relay Configuration
P.014 Trim Reference Source
P.015 Trim Gain Percentage
P.016 Draw Gain Percentage
P.017 Accel Time 2 (RAMP 2)
P.018 Decel Time 2 (RAMP 2)
P.019 S-Curve Enable
P.020 Jog Speed Reference
P.021 Jog Ramp Accel Time
P.022 Jog Ramp Decel Time
P.023 MOP Accel/Decel Time
P.024 MOP Reset Configuration
P.025 Stop Type
P.026 Function Loss Response
P.027 Forward/Reverse Configuration
P.028 Speed Display Scaling
P.029 Elapsed Time Meter
P.030 Elapsed Time Meter Reset
P.031 Preset Speed 1
P.032 Preset Speed 2
P.033 Preset Speed 3
P.034 Preset Speed 4
P.035 Preset Speed 5
P.036 Preset Speed 6
P.037 Preset Speed 7
P.038 Preset Speed 8
P.039 Encoder Loss Enable