ADLINK ND-6067 - Manual (Page 150)

148
6.2.5 Reset Status
@Description
Read the reset status of module at specified address to check
whether if it has been reset since the last reset status
command was issued to the module.
@Syntax
$(Addr)5<CR>
$ Command leading code.
(Addr) Address ID.
5 Reset Status Command.
@Response
!(Addr)(Status)<CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
(Status)
0 : It has not been reset since the last reset
status command was issued.
1 : It has been reset since the last reset
status command was issued.
@Example
User command: $185<CR>
Response: !180<CR>
Status is 0 means this digital I/O module has not been reset,
since the last reset status command was issued.
(601x,602x,605x,60
6x,6080,6531)