ADLINK ND-6067 - Manual (Page 181)

179
(OutData1)
Each bit is mapping to each channel number
(2-character)
* if the port of ND-6058 is in input mode, output data to this port will be ignore
@Response
<CR>
or
?(Addr)<CR>
> Command is valid
? Command is invalid.
(Addr) Address ID.
@Example 1 <ND-6063>
User command: #300003<CR>
Response: ><CR>
30 Address ID
00 Set output to all channels
03
03 (00000011), Channel 0 and 1 are set ON other
channels are set to OFF
@Example 2 <ND-6063>
User command: #2F1201<CR>
Response: ><CR>
2F Address ID
12
1 : Set output to single channel
2 : Output single channel is channel 2
01 Set single channel to ON
@Example 3 <ND-6056>
User command: #30T0303<CR>
Response: ><CR>
30 Address ID
T Set output to all port
0303 0303 (0000001100000011), Channel 0, 1, 8 and 9 are
set ON other channels are set to OFF
@Example 4 <ND-6058>
User command: #2FT010203<CR>
Response: ><CR>
2F Address ID
T Set output to all port
01 Set channel 0 of port A ON