ADLINK ND-6067 - Manual (Page 198)

196
6.7.1 Set Input Mode
@Description
Set the input signal mode of counter/frequency to either TTL or
photo isolated mode.
@Syntax
$(Addr)B(InType)<CR>
$ Command leading code.
(Addr) Address ID
B Set input mode Command
(InType) 0: TTL input
1: photo isolated input
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: $30B0<CR>
Response: !30<CR>
Item Meaning Description
$ (Leading Code) Command leading code.
30 (Addr) Address ID is 30H.
B Set Input mode.
0 (InType) TTL input.
(6080)