ADLINK ND-6067 - Manual (Page 158)

156
6.3.7 Read Channel Status
@Description
Read the enable/disable status the channels of ND-6013,
ND-6017 or 6018.
@Syntax
$(Addr)6<CR>
$ Command leading code. (1-character)
(Addr) Address ID (2-character)
6 Read channel status. (1-character)
@Response
!(Addr)(ChannelVal)<CR>
or
?(Addr)<CR>
! Command is invalid.
? Command is invalid.
(Addr) Address ID.
(ChannelVal) bit 3~0 of 1st character: controlt channel 7 - 4.
bit 3~0 of 2nd character: control channel 3 - 0.
bit value 0: Disable channel
bit value 1: Enable channel (2-character)
@Example
User command: $066<CR>
Response: !0648<CR>
4 is equals binary 0100 that means enable channel 6 and
disable channel 7, 5, 4.
8 is equals binary 1000 that means enable channel 3 and
disable channel 2, 1, 0.
(6013, 6017, 6018)