ADLINK ND-6067 User Manual
Page 214
212
6.7.17 Set Minimum Input Signal Width at High Level
@Description
Set the minimum input signal width at high level, for signal level
high less then this value will be filtered out as noise.
@Syntax
$(Addr)0H(MinFData)<CR>
$
Command leading code.
(Addr)
Address ID (2-character)
0H
Set minimum input signal width at high level
command code.
(MinFData)
The minimum width data at high level. The unit is
μs
and its resolution is 1
μs. This value range from 4 μs
to 1020
μs, which is a 4-digit integer. (4-character)
@Response
!(Addr)<CR>
or
?(Addr)<CR>
!
Command is valid.
?
Command is invalid.
(Addr) Address
ID.
@Example
User command:
$300H0100<CR>
Response:
!30<CR>
Item Meaning
Description
$
(Leading Code)
Command leading code.
30
(Addr)
Address ID is 30H.
0H
Set minimum input signal width.
0100 (MinFData)
100
μs
(6080)