ADLINK ND-6067 - Manual (Page 228)

226
6.7.31 Set Digital Output Values
@Description
Set the value (ON or OFF) of the 2 channel digital outputs.
@Syntax
@(Addr)DO(DoData)<CR>
@ Command leading code.
(Addr) Address ID
DO Set digital data output command code.
(DoData) 00: DO0 is OFF, DO1 is OFF
01: DO0 is ON, DO1 is OFF
02: DO0 is OFF, DO1 is ON
03: DO0 is ON, DO1 is ON
@Response
!(Addr)<CR>
or
?(Addr)<CR>
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: @30DO01<CR>
Response: !30<CR>
Item Meaning Description
@ (Leading Code) Command leading code.
30 (Addr) Address ID is 30H.
DO Set digital data output.
01 (D0Data) DO0 is ON, DO1 is OFF
(6080)